How to get rip cut on narrow boards with just a circular saw? Have you ever practiced ripping a narrow board using a circular saw? Do you have just a circular saw and do you want to rip narrow boards with it? Well, you choose the right platform. We are here with all your queries.
With proper approach and experiment, you can able to get the perfect rip cut on your narrow wood piece with your circular saw. We’re gonna expose you to the easiest step-by-step guide that will make you able to rip even narrow boards using the circular saw for sure. Keep learning and turn into a professional.
Is Ripping a Narrow Board with a Circular Saw Easy?
Exactly ripping a narrow board with the circular saw is tough enough. Because rip cut requires a specialized rip blade to get exact cut.
Besides, you might struggle to clasp the manual for the boards, which will create the system more troublesome. Anyway, it’s possible to slide boards through the circular saw blade. You have to hold the circular saw static to perform the task easily.
Clamp the circular saw on the stage and permit the cutting edge to rotate inside the sole. Then go through the boards you intend to get rip cut inside your saw sole. You will get the work finished.
How do you cut a table saw narrow strip?
Do you want to cut some narrow strips at a different or the same size? It’s not difficult to do with the quick jig table saw. Construct a little wider push block jig than those strips you want to cut together with the ear.
For cutting strips smaller than 1/4-in., use masking tape to coat the table saw throat plate and close down the spinning sharp edge into the tape. (This will protect the narrow pieces from falling down).
Now set the fence. Start cutting the ear at the very same width as your strips. Adjust the wood piece among the jig to cut strips. Follow this technique and cut as many you need with the exact width.
Is It Really Difficult To Ripping Narrow Boards Using A Circular Saw?
When the topic is about a cut using the circular saw, the rip cut is a great option that is chosen by woodworkers. Making a rip cut with your circular saw blade is not tough for professionals. But if you are DIYer without much experience then it will definitely seem troublesome.
It’s essential to keep proper knowledge of using circular saw techniques. If you know the proper technique then you will be able to rip thin boards with just a circular saw effortlessly.
Ripping Narrow Boards Using Circular Saw-Step-By-Step
So, now I’m gonna tell you the easiest way how you can rip a narrow board with your circular saw. This is a step-by-step guide that will let turn you into a professional woodworker.
Choose the right platform
The first thing that is, you have to choose the right platform for your project. You should select a bit wider and longer platform than boards you want to cut. A well-conditioned platform is essential. This is important for your circular saw movement. You may require few plates to support the boards. However, it depends on your cutting wood’s length.
Clamp the circular saw sole to the slab/ platform
Now clamp the circular saw sole to the platform you prepare. Make sure the clamps tightly hold it. If it doesn’t, utilize a few pieces of wood to ensure the sole is hold properly by the clamp.
Make a reference cut to adjust the circular saw to the width
Find the front of the roundabout saw. Cautiously and gradually feed a wood piece into the round saw cutting edge to commit a reference cut. Measure the obtained thickness. If you failed to achieve the intended thickness, correspondingly move the saw front.
Carefully adjust the blade parallel to the face of the platform
For making a rip cut using a circular saw, adjust the blade parallel to the face of the platform. If the blade can’t be adjusted exactly, it may warp when cutting. Besides, the strain may influence the saw engine. It may cause great harm to both the blade and workpiece.
Adjust the height of the blade
The wood or workpiece has to be sliced on the table’s top, so you have to adjust the height of the blade. Drop down the saw blade to the surface. It’s a better idea to make an experiment with paper. Slide the paper and make sure it goes beyond the blade.
Readjust of parallel
For an exact rip cut, adjusting in parallel is important. When you are testing with a paper and if it doesn’t seem well paralleled, again adjust parallel.
Start ripping your narrow board
Now, it’s time to start ripping. To start with, push the trigger and lock it. Gradually feed the workpiece through the sharp blade.
Tips for Ripping Narrow Boards Using the Circular Saw
So, you are gonna rip narrow boards with the circular saw? Here are short tips that you must obey. Remember to take an ear protector, goggles, and face masks to prevent dirt.
Safety Measures to Take While Cutting Narrow Boards
Using the circular saw is risky if you failed to handle it well. So, whenever you want to get rip cut on narrow boards using the circular saw, must obey these safety guide.
- Must use a sharp blade. For getting smooth and clean-cut it’s essential to use a sharp blade. The sharp blades are safe as they reduce sprinter than the blunt blades.
- When need to change the saw blade, must disconnect it from the power root.
- Must wear an eye mask when cutting the workpieces. Otherwise, the wood dust or splinter may enter your eyes.
- Also wear a face shield or mask to prevent dust from getting into the lungs that may cause great harm.
- Before starting the motor, hold the saw handle carefully. Otherwise, it may twist.
Tips And Tricks For Cutting The Board
Overall, ripping with a circular is enough complicated until you maintain the right way. I’m sharing with you some tips, follow them to keep away the common mistakes faced by woodworkers.
Ensure you secure the workpiece. utilize the clamps before start cutting the workpieces. This will assist you with keeping the wood pieces set up to make exact cuts. Read the manufacturer’s guide before starting works. Still, if you are not confident, please take help from a professional carpenter.
FAQ
What must be used when ripping narrow stock?
The major thing is about tools. Crosscut and rip cut deserves different tools to use. Maximum woodworkers utilize the circular saw for ripping narrow stock. To get a proper rip cut on narrow stock, utilize a push staff. Keep a 4 inches distance of your fingers from the sharp blade.
How do you rip a narrow board without the table saw?
Obviously, woodworking exists much earlier than the table saw. If you want a rip cut, the table saw isn’t your ultimate and only way. You may even get a fine rip cut using a circular saw or a bandsaw.
Can you rip cut with the circular saw?
Obviously, you can rip with the circular saw. You may want a rip cut on your wood pieces, but you don’t have a table saw. There is nothing to be worried about. Use your circular saw to get the perfect rip cut. Follow our step-by-step guideline to rip narrower boards using your circular saw?
Can Home Depot rip a 2×4?
Maximum home depot stores have the radial arm saw. This saw permits them to cut dimensional timber, 1 inch and 2 inches thick to width. Making a 4-inch x 4 inch or larger rip cut is out of its capacity. Here a table saw may help to make rip a 2×4.
Which type of stock should never be ripped on the table saw?
You can use your table saw for various purposes. A table saw is an ideal option for ripping. But remember, you should not rip a round stock on your table saw.
Conclusion
Cutting thin sheets is not generally an effortless assignment. This project is quite effortless with the table saw. When you want to rip with your circular saw, it is quite hard. Still, the process is not something so difficult.
I think you may have already tried it but failed somehow. Your failure is normal. Utilizing a circular saw to rip a wood piece may be a bit uncomfortable and abnormal. But it’s not impossible. We tried to disclose the easiest way, “How you can rip narrow boards using your circular saw”. Hopefully, this session will assist you.
