If you are into woodcutting jobs, one of the best things is to get a quality blade to go with your saw. A saw blade is one of the versatile tools when it comes to woodworking. It can be used to crosscut, rip, and many more. A quality blade helps achieve the precise and intended result. Here we discuss the best saw blade for cutting trim.
There are so many saw blades available in the market from different brands. Some are of good quality, while some can easily break down. However, if you want to shop for a new one, choosing the right type is the most crucial part of buying the best saw blade for cutting trim. Take time to look deep into the quality and other vital factors.
To save you the stress of searching, we have written the best saw blades for cutting. You will find each one with in-depth information on the number of teeth, size, effectiveness, and durability.
Top 5 Saw Blade for Cutting Trim Reviews
|Overpeak 10-Inch Table Saw Blade||
||$29.99||Buy On Amazon|
|DEWALT 12-Inch Miter Saw Blade (DW3128P5D80I)||
||$65.17||Buy On Amazon|
|Gunpla 3 Pieces 4-1/2-inch 40 Tooth Soft Wood Cutting Saw Blade||
||$13.13||Buy On Amazon|
|PORTER-CABLE 4-1/2-Inch Circular Saw Blade, Plywood Cutting, 120-Tooth (12057)||
||$10.99||Buy On Amazon|
|Freud D12100X 100 Tooth Diablo Ultra Fine Circular Saw Blade 12"||
||$59.97||Buy On Amazon|
1. Overpeak 10-Inch Table Saw Blade for Cutting Trim
- Item weight- 1.85 pounds
- High rotation speed of 6000RPM
- 10-inch blade with 90 teeth
If you want a blade for a smooth, quick, and accurate cut, then the Overpeak is the best table saw blade. The tungsten carbide teeth are five times durable than similar products and have exclusive heat resistance with better sharp edge retention even after prolonged usage.
Also, it is a general-purpose combination blade with 90 teeth that gives a smooth and sanded cut with minimal tearing out. This 10-inch saw blade is suitable for ripping wood, plywood, lamination, and crosscut. Thus, it promotes an uninterrupted work session by eliminating the need for blade change.
The carbide-tipped extends the blade’s life and makes the tip of the blade hardened against extreme impact. It takes on softwood and hardwood without breaking down. In addition, the saw blade has an overall performance and a high rotation speed of 6000RPM.
It has six laser-cut expansion slots and another four laser-cut vents to help cool down the blade for noise reduction. The anti-vibration mechanism enhances more stability during woodwork. Moreover, the expansion slot help creates a straight cut.
The versatility of this saw blade makes it compatible with different machine use such as a miter saw, table saw, and circular saw. It has a fine silver coating to kick against friction and prevents corrosion while increasing the durability best saw blade for cutting trim. The product comes with a plastic protector case to avoid the accidental cut.
- Cuts eliminate the need for recuts or sanding
- Ensure noise and vibration reduction for more stability
- The general-purpose blade enables you to work without changing blades
- High-cutting blade promotes precise and clean cutting
- More resistant to friction and corrosion
- Not suitable for hardwood
- Does not produce a fine finishing
2. DEWALT 12-inch Miter Saw Blade for Cutting Trim
- Item weight – 1 pound
- 12-inch saw blade
- ATB design with 96 teeth
If you want to conserve time and enjoy your task done speedily, the DEWALT 12-inch miter saw blade has you covered. This blade is swift and perfect for cutting plywood without tearing off or damaging the material. A smooth and accurate cut is one of the notable features of this product. Also, the blade is an alternating top bevel (ATB) design that alternates between the left and right-hand bevel.
This product is a 12-inch saw blade suitable for cutting larger boards than the similar models of 10-inch. One impressive advantage of 12-inch is that it helps you achieve a more precise cut. Also, the blade consists of 96 teeth, a perfect tool for crosscuts and more delicate cuts Saw Blade for Cutting Trim.
The tungsten carbide material improves durability and increases the blade’s enduring performance to withstand overwhelming impact. Furthermore, the blade is structured with premium micro-grain carbide to promote ultra-sharp cutting edges for minimized splintering.
When it comes to cutting, the blade cuts through high-density material with ease. And, the 1-inch arbor helps to make a clean cut during woodworking. Also, the exclusive dampening slots eliminate vibration and decrease noise while maintaining stability and control.
The coating technology improves cutting and helps eliminate friction and blade overheating while increasing the performance of the motor.
- Reduced blade noise and vibration
- Makes a smooth, accurate, and bevel cut
- Withstands overwhelming impacts
- The carbide material improves teeth durability
- Coating technology prevents rust
- The blade can wear out quickly
- Cut are not as smooth as expected
3. Gunpla 4-1/2-inch Saw Blade for Cutting Trim
- Item weight- 3.52 ounces
- Made with durable steel
- Operates with 13,200 max RMP
If you need a heavy-duty circular wood saw blade, Gunpla is on the top list to deliver outstanding performance. It is constructed for excellent performance and to meet every of your project need. Also, it is a general-purpose blade that cuts through hard and softwood without breaking on you. The cutter works perfectly on a miter saw, circular saw, table saw, and radial arm saw.
The blade is made with durable, high-quality alloy steel that can withstand the rigor of heavy cuts. The body of the steel blade is completely hardened and tempered for longevity. In addition, the product is 4.5 in diameter and has 40 sharp tungsten carbide teeth that work effectively with going blunt quickly.
It features Arbor finishing, which supports smooth and ultra-fine finishing. Therefore, this eliminates the need for sanding. The thin kerf carbide-tipped construction provides precise cut with reduced friction on the motor. Also, the ultra-slim kerf design lessens waste of material and less dust in your workshop.
Furthermore, the maximum speed of this blade is 13,200 RMP which makes users experience fast and accurate cutting. This blade cuts through natural wood and composite material, making it ideal for professional use.
The non-stick coating prevents rust and keeps the blade’s surface lubricated for easy passage through the stock. The computer balanced plate technology decreases vibration during operation.
Again, balanced plate technology is essential for stability and accuracy. The easy-to-use features make the blade suitable for both beginners and professionals.
- Teeth are carbide made for durability
- Features computer balanced plates for reduced vibration
- Easy to use features for beginner and professional
- 40 sharp tungsten carbide teeth
- The kerf design is thin for fast and accurate performance
- It might be too dangerous
4. PORTER-CABLE 4-1/2inch Circular Saw Blade for Cutting Trim
- Item weight – 0.17 Pounds
- Thin kerf blade for detailed cut
- Features 4 ½ inch diameter
For a traditional and straightforward high-tooth-count blade, PORTER-CABLE is the best circular saw for plywood cutting. The tooth configuration of this blade allows a fast cut without splintering. This product is constructed with steel and has 120 sturdy precision teeth that cut through any material seamlessly.
Due to the high-quality steel teeth, the blade can withstand wear and tear. Likewise, the high number of teeth gives a sharper and more accurate result. Also, the blade’s unique design makes it suitable for intricate design and art application.
It is a hardened plate for durability and has 4 ½ inches arbor size. The diameter makes it a suitable option for those in need of compact circular saw blades, and it fits any saw with a 3/8 inch arbor. The kerf is thin and helpful for a smooth and detailed cut. Also, the thin kerf ensures the blade does not consume much power by overworking your motor.
Furthermore, the finishing of this blade eliminates the need for sanding. It has gives a clean cut on plywood, hardboards, and other wooden materials. It operates quietly without producing disturbing sounds.
The coating prevents corrosion from building up on the blade and increases the easy slide of materials through the blade with little or no friction.
Added hard plastic around the edges prevent accidental cut and further preserve the teeth from corrosion or natural elements.
- Affordable for those on a budget price
- Has an impressive 120 teeth for a fast and smooth cut
- Smooth finishing eliminates the need for sanding
- Noise-free operation
- High-quality steel teeth
- Blade dulls quickly
- The blade is made of inferior material
5. Freud DO536 Cordless Trim Saw Blade
- Item weight- 0.02 pounds
- 5-3/8 diameter blade with 36 teeth
- Alternating top bevel
The Freud DO536 is a high-quality and performance saw blade designed for efficient ripping and crosscutting. It cut through hardwood and softwood with tearing your material. Furthermore, the saw blade has a 5-3/8 -inch diameter and 36 teeth with a speed of 12,000 RPM that improving the blade’s overall performance and cutting speed.
The teeth are carbide-tipped for heat resistance and to withstand impact. The thin kerf mechanism promotes fast cuts while reducing the strain on the motor. It is capable of maintaining its sharp edge even after prolonging the time of use.
The construction also features an alternating top bevel (ATB) design, making the teeth alternate between left and right. It is accurate, easy to use, and leaves a good finishing, which saves you the stress of sanding.
Likewise, the laser-cut stabilizer vents reduce noise and vibration while ensuring stability and precise cut. Also, the heat vent keeps cooling down the blade during operation and prevents flexing and bending when cutting wood.
The blade’s surface is coated in a non-stick layer to enhance easy glide through materials without friction. Also, it prevents the blade from corrosion or getting too hot during use.
- Reduced blade noise and vibration
- Outstanding quiet and smooth thin kerf blade
- Provides smooth finishing
- Suitable for any material
- Coated in non-stick layer for easy glide
- Does not cut straight
What To looks before buying a Saw Blade for Cutting Trim
Using our definitive guide, you can acquire all the necessary information to understand what kind of saw blade will suit your project.
Blade tooth count
One of the essential features of a saw blade is its teeth. If you are familiar with saw blades, you will know that the tool comes with different tooth counts. So, check carefully and select the one that matches your needs.
Can we say that more blades do a better job? Not really. Each blade has a different configuration to serve various purposes. Thus, if you are into general woodworking, it is ideal you use saw blades with 24-60 teeth.
While, if it is a crosscut project, you can use 60-80 teeth or even more.
Considering the material used for construction would help in selecting the right blade. Also, Saw Blade for Cutting Trim, determines how strong your saw blade will be and how long it can retain sharpness.
Furthermore, the material to choose depends on the nature of your general task. There are different materials, but the common ones are high-steel, steel alloy, and carbide. Each material has both advantages and disadvantages; hence you will need to decide what works best for your project.
However, high-speed steel blades are best for a budget price and are easy to sharpen.
Another thing to guide your purchase is the arbor size. The arbor size determines if the blade is compatible with your circular saw. Thus, there is no incorrect arbor size; it depends on the size your circular saw model can work with.
However, most saw models are universal and compatible with 5/8 inch arbor size. It is advisable to know the right size that goes perfectly with the circular saw in your workshop.
Kerf describes the width of the cut a blade makes in a piece of material. The majority defines kerf as the thickness of the blade.
Nevertheless, the thinner blades allow for a more accurate cut with less material waste, and the standard kerf is 1/8”.
The size of your saw will decide what diameter of the blade is needed. Saw blades with large diameters can cut through larger boards, and the standard sizes for large diameters are 7.5, 8.5, 10, and 12 inches.
Moreover, a larger diameter blade has more teeth compared to a smaller diameter blade. If your work entails crosscuts, you need a saw blade that is 10-12 inches in diameter.
Durability is an essential factor to consider. The more durable The material, the more excellent your job looks.
Therefore, check if the blade has micro-grain carbide teeth, this will help the edge retain sharpness over a long time.
Many people may not see the importance of coating as every other detail, but coating serves a relevant purpose. It is not just an extra layer but helps keep your blade cool and cleaner.
A coated blade prevents corrosion and reduces friction against gliding materials. Hence, having this consideration will help improve the lifespan of your motor.
What size of saw blade do I need?
The size of the saw you have determines the size of the blade to purchase. Ensure to use the size fits the design of your machine.
What saw blade makes the smoothest cut?
If you need a very smooth finish for excellent work (such as moldings), go for 80-100-tooth ATB blades.
Also, if you need clean-cut plywood, melamine, and MDF, a 40-60 teeth alternating top bevel (ATB) will work perfectly.
What saw blade is suitable for ripping?
The best blade for ripping is called a rip blade. These particular blades are designed to cut through hardwood and other high-density materials.
Also, with this, you can get a clean edge cut that saves you the stress of sanding the material. Rip blades typically have fewer teeth compare to every other model. Fewer teeth make effective ripping.
What is the difference between a hacksaw and a hand saw?
The significant difference is the structure and shape, while a hacksaw can cut through steel and plastic, while a hand saw can only work on wood.
Hacksaw promotes more versatility because of its interchangeable blade features. Handsaw also features removable blades, but they are not as common as that of a hacksaw.
Are more teeth on a saw blade better?
More teeth guarantee a more accurate and precise cut. Nevertheless, fewer teeth make your project easier and faster. For instance, a 16-teeth blade cuts more rapidly than a 140-teeth blade option.
However, if you need a smooth and clear cut, you may choose a middle number of teeth between 16-140.
How do I clean a saw blade?
Purchase a neutral PH cleaner or if the blade is rust-resistant, use a mild detergent with warm water. Then soak the saw blade in the water for easy removal of debris. Next, use a nylon-bristle brush to scrub the teeth of the blade carefully.
Keep cleaning until the dirt is completely removed. Dry the saw blade in a well-ventilated place and apply corrosion preventive spray or oil on the blade.
With the multiple brands and models of saw blades in the store, we advise you have to look into a few factors and features. Features such as size, durability, reduced noise, and vibration determine the functionality of a saw blade.
Also, each blade you see has been designed to match specific saws, which could make figuring out the right one a bit overwhelming.
Nevertheless, we have provided some detailed guides for the easy choice of a saw blade. All you need is to pick the one suitable for your work.
However, if you are looking best circular saw blade, the Dewalt circular saw blade is the best fit. It is reinforced with a tungsten carbide tip for effectiveness and prolonged sharpness.
Also, we have a reliable and versatile SUIZAN hand saw, either you are a beginner or professional; you need this hand tool for detailed perfection.
Likewise, Gunpla 4-1/2-inch is among the best because of its exclusive general purpose. Its compatibility with many machines makes the blade the most sought-after.
It tolerates high speed and can withstand high-density material without breaking down. The saw blades listed are some of the best you can lay hands on for excellent performance.
Hi their! I am working with daily instruments since 2018. I complete my M.SC in Mechanical Engineering. I accomplished with commencement in 2009 from the College of Colorado Denver. Now I am working for a widely known tools firm. Sometimes i write informative article on my blog weeklytools.com & dailytools.com