Woodworkers from small workplaces usually prefer the non-sliding miter saw. A non-sliding miter saw is easy to carry and effective at angle cut.
Generally, four types of cutting require a non-sliding miter saw- compound, angle, bevel, and crosscut.
Blades of non-sliding miter saw will not warp faster as well. A non-sliding miter saw is inexpensive, which can minimize the cost of your project.
If you do decoration and renovation projects along with carpentry, a non-sliding miter saw is the best choice for you.
The blade of the non-sliding miter saw is versatile. It moves in both forward and backward directions, which allows you to make an extended cut easily. So, buying a non-sliding miter saw is priceworthy.
Non-sliding miter saw offers portability which offers accessible carry features from home to job. In addition, this type of miter saw can make beveled cuts.
A non-sliding miter saw is lighter than a sliding miter saw. Therefore, it maintains the center of gravity during work.
The non-sliding miter saw can cut aluminum straight, fast, and smoothly. In addition, a blade of non-sliding miter saw can last for at least five years from the beginning.
It would be best to be very careful while operating it because its horsepower motor has too much power and can act deadly with lousy handling.
Grab it well because it may create a lot of reserve pressure on your hand while working. It will be best if you use a pair of hand gloves. Never pull the saw back up while turning it off.
Before operating with a non-sliding miter saw, please follow safety protocol and always wear safety glasses.
Keep your finger away from the blades while keeping the non-sliding miter in hand. With its weight and portability, it will be your best friend in any DIY project.
So, don’t compromise with the price to buy the best one.
- MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
- LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
- MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
- BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
- LARGE TABLE: Offers better material support with vice clamping system to secure work piece
- THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments
- HORIZONTAL HANDLE: For a secure hold
- WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty
- ELECTRIC BRAKE: Halts the rotation of the blade within seconds preventing unintended cuts
- Maximum Output : 1,950 W
- Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops
- The mitre saw has a precise miter system and machined base fence support
- Tall sliding fence of DEWALT miter saw supports 4-1/4-inch base vertically
- Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right
- 2-inch x 6-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 4-inch dimensional lumber at 45 degree
- 0-52 degree miter angle range to the right & left for increased flexibility
- 0-45 degree bevel range to the left to provide clean and accurate bevel cuts.Thumb actuated positive stops for quick miter adjustments
- 24.2 lbs to facilitate maneuverability and easier transport.Dust collector attachment included to minimize airborne particle
- 15 Amp motor delivers high power for the toughest cutting jobs.Large table for better material support with vice clamping system to secure work piece
- Miter ranges – left 52, right 52
- Powerful 15-amp motor cuts boards up to 12 inches wide and 3-1/2 inches thick
- Miter 45 degrees in either direction (featuring 9 miter stops) or bevel 45 degrees to the left
- Onboard class II laser guide illuminates your line of cut
- Features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity
- Includes a 10-inch 40-tooth carbide-tipped blade, two table extensions, one clamp assembly, a dust bag, a dust port adapter, and a two-year warranty
- This Certified Refurbished product is manufacturer refurbished, shows limited or no wear, and includes all original accessories plus a 90-day limited hardware warranty.
- Portable, powerful 18V miter saw design – a truly mobile jobsite solution, This saw provides light weight and Pro capacity
- Pro capacity – delivers 3-5/8 In. nested crown cutting, with 47° left to 47° right cuts against fence and 10-5/8 In. crosscuts
- Convenient portability – weighs only 31.5 Lbs. (tool only, not including battery)
- Accurate laser guide system – precisely aligns the cut line to the blade
- CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without reaching behind the saw. The saw also features easy-to-read miter and bevel scales.
- SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece support. Bevel Angle Range: -2° to 47°
- CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed view of the saw in action. The detent system provides quick and accurate cuts.
- PORTABLE: The Bosch CM8S miter saw CM8S has the same crosscut capacity of 12-1 4 in. as a 10 inch miter saw but is 30% lighter. The Bosch exclusive design provides ultimate portability with a top carry handle and a weight of just 37 pounds
- PORTABLE: The Bosch CM8S miter saw CM8S has the same crosscut capacity of 12-1 4 in. as a 10 inch miter saw but is 30% lighter. The Bosch exclusive design provides ultimate portability with a top carry handle and a weight of just 37 pounds
