Daily Tools Guide

Daily Tools Guide talks about everything related tools, home, service & health.

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
You are here: Home / Saw / Miter Saw / How To Change The Blade On A Delta Miter Saw

How To Change The Blade On A Delta Miter Saw

by

Still searching, “how to change the blade on a delta miter saw?”  Well, worry no more, you reach the right place. Delta miter saw, is a saw that can cut a variety of ingredients with just a single tabletop. Like all others, delta saws’ performance depends on its blade. Delta saw blades need replacement when it gets dull.x

The replacement process for the Delta miter saw is a bit different than other brands. Our today’s discussion is about, “how to change the blade on a delta miter saw?” We are always committed to delivering the easiest solutions, as we care about you. Stay connected to learn more.

Contents show

Types Of Circular Delta Blade

 Delta circular saw is a tool that can handle various projects. Delta circular saw is used for cutting wood, plywood, PVC, plastic, metal, and so more. For specific cuts, the Delta circular saw requires specific blade types.

The saw blade is divided into major three categories. The crosscut blade, the rip-cut blade, and the combination one. Let’s look at these three major blade types.

Crosscut Blade: The crosscut blades are used to cut wood across the main grain. A crosscut blade contains more teeth than a rip-cut blade and also has shallower gullet. Crosscut blades provide a very clean and smooth cut. Their cutting process is a bit slower than others.

Rip-Cut Blade: The rip saw blades are intended to cut long tears along grain/ the longitudinal or pattern of fibers in wood. The rip saw blades contain fewer teeth and deeper gullets. The tooth count is around 14-24. A rip blade is ideal for quick and rough cuts.

Combination Blade: The combination cut also called the general purpose blade is a solution for all types of cut. The combination blade stays between the crosscut and rips the cut blade. When you want to buy just a single saw to handle different cuts, a combination saw is your solution.

But, when you are a professional one, I’ll recommend using the specific blade for specific work purposes. A combination blade can’t deliver the standard quality cut.

Blade replacing process of Delta Miter Saw

When you have a Delta miter saw and it requires a replacement blade. So, how do you replace a blade on a delta miter saw? Presenting the easiest instructions to replace the blade on a delta miter saw.

  • Turn off the power line from the divider outlet before starting your project.
  • Utilize a wrench to loosen the nut.
  • Take off the nut and remove the existing blade from the Delta miter saw.
  • Place a new blade at the same position and place the nut and keep tightening until it fits completely.

How to Change Blade on Miter Saw

Many individuals likewise search for, how would I change the edge on a miter saw? Follow these instructions to change the blade on a miter saw.

  • Firstly, take aside its spindle cover. Turn the cutting-edge safeguard to its top position.
  • Now, remove the existing blade. Push the spindle lock button to completely lock it.
  • Replace with a new sharp blade. Blade replacement is just opposed to removing.

Change The Blade On delta miter – Step by Step Guide

  1. This content is gonna show you a step-by-step guide on how to change the Blade on a Delta miter saw. For a blade replacement of your saw, no need to look for a replacement center. You can do it by yourself. Follow these step-by-step guides to do the work effortlessly.
  2. Turn off the power cord of your Delta miter saw from its outlet. Pick the blade head up in the top position. This is the piece of the miter saw with the sharp cutting edge and handle.
  3. The lower part of the blade guard stays secure with small screws, find them. The lower plastic blade guard pivots you from unwanted cuttings of materials. Utilize a screwdriver and remove the screw.
  4. Turn the lower cover in the blades back. Look at the motor drive case, you will notice a bolt in its center.
  5. Use a wrench to loosen the bolt that keeps the blade secure. Remove both the blade and washer from your Delta circular saw.
  6. Replace the very spacious one with a new blade. Make sure you choose the right size blade, otherwise it will not fit perfectly.
  7. Finally, pull down the miter saw lower guard and install all the screws. Tighten them enough and the project is okay for your work.

What type of miter Saw Blade Size Needed

The most used diameter for a miter saw or circular saw is 10″ or 12″. Just like all other hand saws, miter saw teeth are also carbide-tipped. Miter saw is used for getting perfect cuts at home. A 10-inch long miter saw is the ideal option for maximum carpenters. Some people also prefer to use a long 14-inch miter saw blade.

Maintenance Of The Skilsaw Circular Blade

When you own a Skilsaw circular saw, you must maintain that it can perform well for a long period.  Follow these steps for proper maintenance of the Skilsaw circular saw.

  •  Keep the blade away from wet places or weather. Excessive moisture will create rust on the blade’s surface.
  • Keep the Skilsaw blade clean to maintain its sharpness. Accumulated pitch, soil, dust may dull your blade. A dull blade needs more power to perform its job.
  • Avoid using the wire brush to clean the Skilsaw circular saw blade. It causes erosions to the blade. Use a regular toothbrush or a nylon brush.
  • Avoid overheating. If you need to cut in a great quantity of hardwood, don’t complete the job in a single rest. Take several breaks after cutting the portion.
  • Don’t let your circular saw blade take rests on a cement or metal surface. The hot metal blade on the metal or cement surface may get dull. It’s better to place the blade on a plastic or plywood surface for rest.
  • Clean and lubricate your blade regularly. This will protect the blade from getting dull and keep sharpness like the brand new.

FAQ

What simple way to change the blade on a 10 inch Delta miter saw?

The most effective method for replacing a new blade on your 10 inch Delta miter saw is just, you have to unplug the saw from its power cord. Remove the screw and place the plastic guard on top. Enter a hex wrench to open the backside of the engine shaft situated on the saws’ right side.

How do you unlock the blade on a Delta miter saw? 

A Miter saw is a heavy-duty, common power tool in our everyday life. Sows are essential for carpenters, DIY projectors, etc. The process of unlocking the blade on a Delta miter saw is straightforward. All you have to do is just…

  • Firstly unlock the head
  • Then unlock the base
  • Finally, lock the tilting bevel.

What is a blade wrench?

A wrench is a tool used for gripping and turning nuts, bolts, pipes, etc. A blade wrench is likewise used for tightening, losing, or removing the saw nut and bolts. For blade or any other thing replacement, a blade wrench is a must-have tool to remove or secure the blade with the saw machine.

Can you use a circular saw blade on a miter saw?

Yes, you can use a circular saw blade on your miter saw because manufacturers planned circular blades to suit with a table saw, miter saw, standard miter saw, cut-off, and radical saw as well. Some circular saws can interchangeably be used between devices. Utilize the exact sizes of blades for every job.

Good Bye Word

Like all other saw blades, the Delta miter saw needs changing its blade. The reasons may be different. After several uses, the blade may get dull. A dull blade can’t perform better through materials. It requires more force. Your work purpose may also change. You may need a new cut that requires blade replacement. Your project may also need a blade with more teeth.

Whatever the reasons are, the only solution is a replacement blade. You can choose your miter saw from DeWALT, Ryobi, Delta, or from Hitachi brand. Choose a replacement blade, know how to change the blade on a delta miter saw, and save money.