Chop saw is an ordinary saw used to cut metal. And for cutting metal, a circular blade is used in a chop saw. The blade of the chop saw has a notch at the tip. Various shaped notches are used on different blades depending on the type of cut. So you have to choose the blade on top of what kind of metal you will cut. Otherwise, you will not get satisfactory results.
If you work with various metal cutting, you will need to purchase a few different blades. And there is a qualitative difference between these blades. Here are some of the best chop saw blades explained, which will help you to get the desired product of your choice.
Top 5 chop saw blades for steel review
1. IVY Classic 40088 Blade for Chop Saw
IVY Classic 40088 is an excellent quality chop saw blade. These IVI blades are specially designed to cut angle iron, sheet metal, steel, and other ferrous metals. It’s a Type 1 blade, which you can only use for cuttings. The blade is made of aluminum oxide. And Aluminum-Oxide grain gives the blade the ability to cut faster.
This blade has a high-quality cutting ability. It can cut metal quickly, and the metal arbor reinforced produces more extra durability. The Classic 40088 blade uses two full sheets of fiberglass mesh to augment, making the blade durable and safe. So you can use it with total confidence. This product can operate at speeds up to a maximum of 6, 100RPM. This blade, which is ten inches in diameter, cannot be used on high-speed saws. It has a 5/8-inch Arbor and a Width of 3/32-inch.
That blade can rotate at high RPM so that it can cut metal easily. And the blade is very durable and lightweight. It weighs only 4.2 ounces. With this blade, you will perform your job perfectly and use it for a long time. If you want a good cutting blade for your chop saw at a moderate price, then you can consider this blade.
2. T1 Chop Saw Blade Abrasive Cutting Wheel
If you are looking for a good blade for cutting ordinary metal, this blade is probably made for you. This cutting blade is known for its toughness with high-performance cutting. It can give reliable sharp cutting and perfect finishing to its users. It is one of the best-selling chops saw blades for its excellent performance.
It’s a fourteen inchi blade. And aluminum oxide has been used to build these blades. So this blade will be cutting metal with precision and perfection. This blade will give you the highest strength, which will speed up your work. This cutting blade Weighing 15.9 pounds. Two full sheets of fiberglass are used on the blade to withstand extreme applications and maintain high speeds. The blade can run up to a maximum of 4400 rpm. So I can say without any doubt that the blades can give you a satisfactory performance. and it is one of the best metal cutting blades in its category
This cutting blade of the chop saw contains ten blades in one packet. It has been confirmed to be suitable for general metal cutting. This blade is highly suggested for you if you are looking for a cutting blade for quick and easy metal cutting and other general services for your chop saw.
3. United Abrasives-SAIT 24013 Worker Chop Saw Blade
United Abrasives-SAIT 24013 is the most expensive chop saw cutting blade on our list. The diameter of this blade is sixteen inches which are pretty significant from other blades. You can only use it for cutting, which means it is a type one blade. Ten blades come as one packet. Also, the Manufacturer made this chop saw blade with premium material. It has been quality controlled and tested at the factory. So you will get excellent performance from the blade.
It is made of high-quality stainless steel and formulated with 3M Cubitron grain. So you can be utterly worry-free with the longevity and durability of the blade. And With this blade, you can cut any material very fast and burr-free. This blade can perfectly cut stainless steel, high tensile alloys, and ferrous metals. A unique feature of this blade is that it can cut fast, even with slight pressure on low power chop saw machine. The blade is externally reinforced with the highest quality fiberglass to work against hard metals. This product also has a frustration-free certification. The blade weighs 1.52 pounds, and it can rotate at a maximum speed of 3,700 rpm.
It is a professional-grade working cutting blade. The blade has excellent performance with durability. It also costs a lot more. However, the price of the blade is in line with the features it offers. So if you have enough money and you want to buy a top-quality chop saw cutting blade for long-term use, then you can buy United Abrasives-SAIT 24013 cutting blade without hesitation.
4. DeWalt DW8005 General Purpose Metal Chop Saw Wheel for Steel
DeWalt has an exceptional reputation in the power tool industry. The DeWalt brand is best known for its premium quality products. DeWalt brand cutting blades are professional-grade, and these chop saw blades are made to maintain the correct size, diameter, and quality. Also, this brand checks the quality of the product and the bond of the resin well before selling. So you don’t have to think about the quality of this product.
Two full fiberglass sheets have been used in the blade for its efficiency and safety. And this cutting blade has a premium grain formulation, which increases the life and speed of the blade. The DeWalt DW8005 blade is equipped with heavy-duty carbide teeth for its longevity. And there are also ejection springs for easy plug removal. The optimized tooth design of the blade helps to increase the cutting speed. This DeWalt chop saw blade is suitable for low-power chop saw, high-power chop saw, portable high-speed chop saw, grinders, and circular saws. Aluminum has been used to make these chop saw blades. This ten-inch size blade weighs 0.16 ounces.
This blade from the DeWalt brand is one of the best-selling products with high ratings. And the quality of the blade is much better. Also, the price of this blade is very affordable. This cutting blade is giving a three-year limited warranty at this price range. So If you want to buy a good chop saw blade at an affordable price, this blade will be a perfect choice for you.
5. Abrasive Cut Off Blades Metal Cutting Chop Saw Blade
It is the last blade on our list. The performance of this blade is remarkable. The 14-inch size blade has excellent build quality. This blade has 1/8 inch thickness, and there is a cutoff one inch in size for the arbor. This blade is suitable for all kinds of cutting. Also, its price is very affordable. It’s a hard enough blade, so the chances of the blade breaking during your work are meager.
These blades are manufactured with White corundum, and High-performance aluminum oxide grain has been used. So its life span is longer and can cut faster. This blade is especially suitable for static chop saws. This blade is used to cut angle iron, steel, carbon steel, bronze, brass, ferrous and other metals. So you can easily carry out your cutting work with this blade. And you will be impressed by the performance and durability of these blades.
These blades are offering great value for money. And because of the excellent user experience, the blade got a much higher positive rating. Each packet has ten rear blades. One package of blades weighs 12.89 pounds. Overall it is a good cutting blade. The blade has several unique features that make it one of the best blades in this price range. Finally, this blade can be recommended easily for a chop saw.
How To Change A Chop Saw Blade
To change the blade of a chop saw
- First, you have to switch off the power of the machine. Then need to unplug from the wall socket.
- There is a switch on the side of the saw lift handle. The Abrasive blade should be locked with the button so that the blade cannot move.
- After securing, hold the blade tightly and open the bolt in the middle of the blade with a socket wrench.
- After removing the bolt, you will see a washer there. Also, please remove it. This time, you must carefully remove the old blade from the saw and raise a new blade.
- The blade must be compatible with the diameter of the saw. After installing the new blade, the washer has to be appropriately placed, and the bolts have to be tightened well. Please unlock it. Thus the blade of the chop saw is to be changed.
What to looks at before buying a Chop Saw Blade For Steel
There are different types of blades available in the market now. There are a few things to keep in mind when buying blades. So we have arranged a complete buying guide to help you buy the right blade for your chop saw.
Material
A blade has to be selected depending on the material used to make the blade. Because how strong the blade will be, how durable it will be, how sharp the blade will depend on its material.
The blades are made using different materials like stainless steel, aluminum, corundum, carbide, etc. Each material has some disadvantages and advantages. So choose the suitable material according to your type of work.
However, the blades made of aluminum can be called the best at an affordable price.
Arbor
Arbor size is significant for a blade because you cannot use the blade if the size of the arbor is not compatible with your saw. However, most chop saws have universal compatibility.
Therefore, before buying a blade, make sure that the size of the blade’s arbor is compatible with your saw.
Diameter
Depending on the size of the saw, you will need to buy a blade of the required diameter. Larger diameter saw blades can cut more. And standard size blades are usually 10,14,16 inches in diameter.
Moreover, if you are doing moderate work, then a blade of 10,14 diameter will be enough for you.
Durability
Durability is a crucial issue in the case of a chop saw blade. The more durable the saw blades, the more confident you will be able to work with them. And aluminum oxide grain increases the durability and performance of blades.
So it would be best if you bought the blade by looking at that feature.
Blade coating
Many of us do not notice this thing when it comes to buying blades. This feature is essential for a blade. The extra coating dramatically enhances the longevity and performance of the blade.
A coated blade generates less friction against the rigid material, reducing corrosion, thus increasing the longevity of the blade. So must buy a coated blade.
Price
Many of us are confused as to how much money we spend on buying a blade. When purchasing a blade, you need to remember to find a blade that can meet your work needs and do not spend extra money to buy a blade that has something more to offer than what you need. That means you have to try to buy the blade that provides the most value for money.
FAQ
What is the best blade for a chop saw?
There are different types of blades available in the market now. And it is not possible to say which blade is the best. Because if a blade is to be the best, it has to be ahead of other competitors in the same price range. But as the price goes up, you will get more feature-rich blades, and as the price goes up, the best blades will continue to change.
Therefore, you can say that the blade that offers the most value for money in your budget is the best. However, the DeWalt DW8005 blade will be the best in the affordable price range.
Can you cut steel with a chop saw?
The chop saw is made for cutting metal. So you can easily cut steel with a chop saw.
What type of blade is used to cut steel?
Ferrous-type blades are used for cutting steel.
What size blade does a chop saw use?
Blades of different sizes are available in the market. However, blades of 10,14,16 inch sizes are usually used for a chop saw. And before buying a blade, make sure that the length of the blade is compatible with your saw.
How do I know if the blade is strong?
It’s a common question. We have given a review of the abrasive chop saw blades here. Fiberglass is used for reinforcement in abrasive blades.
Therefore, if a double fiberglass sheet is used for reinforcement in the blade, you will understand that the blade is vital.
Can you sharpen a chop saw blade?
It is not possible to sharpen the blades of the chop saw.
Good Bye Word
When buying a blade, we advise you to look at several aspects of the blade. The size, diameter, durability, material of making the blade, etc., determine the effectiveness of a blade. So before buying a blade, look at those things carefully.
Each blade is designed for a specific saw. Yet, we have tried to give a detailed guideline. So that you can choose the right blade for you. However, each blade on our list received a much better rating. But some blades in it are fantastic.
Such as United Abrasives-SAIT 24013. it’s an excellent blade. These blades are lovely in all respects, but the packs of these blades are pretty expensive. If your budget is high and you want to buy a slightly larger blade for long-term use, you can buy this blade pack. Also, if you’re going to buy a blade that gives a long-lasting and good performance of general work at an affordable price, then DeWalt DW8005 10 inch blade will be the best choice for your chop saw.
Here We have tried to provide a complete guideline for buying the best chop saw blade. Hopefully, our approach will be helpful for you, and you will be able to purchase the product you want.
Hi their! I am working with daily instruments since 2018. I complete my M.SC in Mechanical Engineering. I accomplished with commencement in 2009 from the College of Colorado Denver. Now I am working for a widely known tools firm. Sometimes i write informative article on my blog weeklytools.com & dailytools.com